Mar 8, 2018
61 Views
Comments Off on 10 Signs That You May Need A Water Softening System In Your Home
0 0

10 Signs That You May Need A Water Softening System In Your Home

Written by

Most water supplies today have a substantial level of conditioning and filtration before they actually reach your faucet. If you have a private well, you probably have your own water treatment system. One thing that you may not realize is missing from your home whether you have a private well or you depend on municipal water is protection from hard water.

Hard water is the term that refers to water that has a high concentration of minerals such as magnesium and calcium. The minerals are harmless when ingested but can cause a lot of damage to your plumbing system. Hard water should be taken care of using a water softener as it is entering your home before it gets the opportunity to ruin your pipes.

Here Are 10 Signs That You Need A Water Softening System in Your Home

  1. Smelly, Strange, or Unpleasant Tasking Water

One of the clearest signs that you need a water softening system in your home is when your water has a strange or unpleasant taste. It could also have an unpleasant taste in addition to the unpleasant taste. The foul taste can come from too much iron, which is responsible for the metallic taste. Corrosion, sediment buildup, and hydrogen sulfide gas can also give water a foul smell or taste. A water softening and conditioning system Apec Roes can eliminate such issues.

  1. Crusty Faucets and Soap Scum

Have you noticed some crusty white residue around your faucets? How about soap residue on your shower and bath? Or your dishware is perhaps covered in white transparent spots? All these are signs of hard water. The mineral ions responsible for water hardness i.e. calcium and magnesium tend to leave behind these deposits. The scale is not only embarrassing and unattractive but could also make you have to repurchase dishware more often than necessary.

  1. Yellow or White Residue Buildup Around Drains and Sinks

If you see a yellow or white residue buildup around your drains and sinks, this is a telltale sign of a potential plumbing disaster. The same type of buildup forming outside is happening on the inside as well as in the pipes. The mineral deposits will slowly continue building up and restricting the volume inside the popes. Eventually, you might have to replace your water pipes and faucets far sooner than you originally anticipated.

  1. Water Spots on Glasses After Doing the Dishes

Water spots that appear on your glassware once you have finished doing the dishes might do so due to the minerals present in your water supply. The water spots may be harmless but are still quite an annoyance and could be an indication that your dishwasher is accumulating damage from the same hard water molecules responsible for jamming pipes and costing homeowners thousands of dollars.

  1. Fragile Glassware

The increased fragility of glassware is one of the surprising side effects of hard water. Glassware can easily become stained if it is exposed to minerals either in the dishwasher or the sink. The abrasion may even weaken the surface, making it easier to break. Vinegar can be used to remove the stains when soaking in the sink or in the dishwasher, although the problem will persist as long as you have hard water.

  1. High Water Bills

Examining your water bills is one way to tell whether you have hard water in your home. Rising meter counts that don’t reflect actual usage could be yet another sign of hard water. Since the mineral content damages your pipes and affects the water pressure, you would be inadvertently pulling more water into your home to achieve the same amount of output in your sink, toilet, or tub.

  1. Frequent Plumbing Issues

Reduced water pressure and the frequency of plumbing-related repairs are both signs of hard water. Limescale may wreak havoc on the pipes, particularly iron or steel. While PVC and copper pipes might be more resistant to buildup, they too can get clogged over time. As the scale continues clogging the pipeline, the water pressure is reduced, which allows the process to accelerate. The buildup may even lock valves and cause appliances to leak and require more frequent repairs.

  1. Showerheads Clogging Up Quickly

The mineral buildup may over a long period of time restrict water from flowing through your pipes. However, the minerals may prevent water from flowing through a faucet or showerhead in less time. The buildup can clog your showerhead or aerator of your sink thus slowing down the water pressure. You can unscrew the end of the faucet and clean out the aerator, but it is a sign of a greater problem that can only be resolved using a water softener.

  1. Limp Hair and Dry Skin

Hard water can affect the body too. It may cause your hair to become greasy, dingy, and limp and make your skin itchy and dry. The reason why this happens is because soap and shampoo don’t lather and rinse properly as when you are bathing in soft water. You can try all beauty remedies found online or offline, but the best and only true cure is to install a water softener.

  1. Dingy Stiff Laundry

If you wash your clothes in hot water, do they smell somewhat dingy and feel stiff too? Do your clothes tend to fade quickly? If the answer is yes to any of these questions, then you are facing a hard water problem. It is important to only wash clothes in conditioned/softened water to protect your valuable garments, avoid having to spend more money on new clothes, and start feeling more comfortable and looking your best.

The 10 signs discussed here should let you know whether you need a water softening system in your home. If you want to install a water softening system, you should contact a reputable water treatment company for expert advice. The water treatment company will analyze your water and recommend a cost-effective solution to ensure that your home always has clear, clean water.

(Visited 10 times, 1 visits today)
Article Tags:
Article Categories:
Plumbing

Comments are closed.