Does Bleeding The Radiator Reduces Boiler Pressure
Practically everyone uses a boiler but only a few of them really understand how they really work. It is important to know how a machine works in order to keep up with the maintenance. The pressure of the system boiler must be right to ensure that it functions properly. Moreover, keeping the pressure at an optimal level saves you loads of energy and it is cost-effective as well. However, sometimes pressure may increase or decrease causing unwanted issues. There are many ways to reduce the boiler pressure amongst which bleeding is best amongst those. If you were looking for ways to reduce boiler pressure then this article has got you covered. This article will guide you through whether bleeding the radiator reduces boiler pressure or not.
What Is Boiler Pressure?
Understanding boiler pressure is not that difficult as the term itself sounds. It refers to the balance obtained between the water and the air in your system boiler. Water pressure is entirely different from boiler pressure and it shall not be confused with it. In order to work properly, the boiler pressure must be at an optimal level. This means that the pressure shall not be too high nor too low. Both carry their own disadvantages; low boiler pressure could prevent your system boiler from working properly as it will cut off directly. On the other hand, high boiler pressure provides an excess of load which may cause your system to fail.
Reason For High Boiler Pressure?
As discussed earlier, high boiler pressure can cause huge problems for a boiler. Due to this reason, many people find ways to lower it down. High boiler pressure is mainly caused due to the excessive amount of water in the system. Moreover, it naturally rises whenever the heating or hot water is in use. Many people wonder whether they can lower down the boiler pressure by opting for bleeding. Without a doubt, the answer is yes.
Bleeding Your System Boiler
Bleeding your radiator lowers your boiler pressure by great margins. Bleeding your radiator reduces the pressure in your system boiler and central heating system. This results in your boiler pressure being lowered simultaneously. One shall have a radiator key for this and it can be found at any local hardware store. One has to make sure that the boiler is cold before bleeding the radiator. It is a safety precaution that is taken to ensure that no one gets burned by the scorching hot water.
Firstly, one shall locate the release valve on the radiator. It is mainly located on the top side of the unit. Then one should take the help of the radiator key and should slowly release the air from the radiator. While doing so, the water would slowly start to leak from the unit due to which it is suggested to have a cloth and towel along with you. Once you are sure that you have successfully completed the process of bleeding the radiator you will notice that there would be no more air or liquid discharged from the radiator. Meanwhile, due to the bleeding of the radiator, you will notice that the boiler pressure would start to lower down and reduce back to normal.