Five Quick Ways To Resolve Your Plumbing Issues

Plumbing

An average household faces plumbing issues now and then. Some plumbing issues might be bigger than the others, it just depends on the issue which arises. For example, minor and inexpensive issues such as leaking faucets and clogged toilets can be sorted out quickly while, on the other hand, severe issues like a leak in the main pipe in the main pipe will tend to cause damage to the floors, ceiling or walls of your property.

These problems are mostly inevitable and are part of house repairs. While few problems appear due to a normal tear in pipes and drains, while others can cause bigger damages to the property.

According to a survey, every house owner can face a plumbing problem at least once in 3 years. Most of the plumbing jobs require professional service to take care of all the leakages. For example, services like 24 hours plumber Sydney, many of plumbing-related problems can still be sorted-out without costing much on your wallet.

In this article, we will discuss some of the common problems that can occur in almost any household. And with few measures, you can easily solve them and minimize the overall damage.

  1. Dripping Faucets

One of the most common plumbing problems that almost every householder has experienced is dripping faucets. The problem doesn’t only cause great irritation but also causes water wastage and wet floors. Just to mention, the amount of water loss that can happen due to one single faucet leak, is approximately a hundred gallons over twelve months.

  • Ways to Resolve: Replace the Washer or the O Ring

In the majority of the cases, the main cause of faucet leak is an internal fault with the washer, which might have become stiff, worn-out or loose over time. Fortunately, fixing this issue does not require in-depth technical knowledge or professional tools, it can easily be handled by an average person.

The problem of dripping faucets can also be resolved by replacing the worn-out washer or O ring with the help of simple tools such as wrenches and spanner. It is advised, not to ignore this issue for long because an improper faucet can cause corrosion and line damage if not addressed promptly.

  1. Slow Draining Sink

The problem of slow drainage is common in kitchen sinks due to the food stuck in the food grinder or drainage pipe. This problem can be very frustrating because it restricts the flow of the water. In bathroom sinks, the slow draining sink can be caused by knotted hairs or soap pieces. Clogged sink drains can result in several health hazards and might even cause a plumbing disaster.

  • Ways to Resolve: Use a Plunger or Drain down Anti-Clogging Chemicals

This problem does not require special expertise and be solved by just using a plunger, pouring down clog removing liquid and baking soda mixture or using a plumbing snake.

While using clog removing liquids, be sure to handle it carefully. As the liquid contains harsh chemicals so it’s better to wear gloves and goggles and cover the surrounding area of the sink with a tea towel. The pouring of chemicals may produce a chocking gas, so, if you have breathing issues, it is better to stay away from this job.

Also, refrain from using chemicals on your pipes for no more than once a month, otherwise, it can badly damage your pipe, making it thin and prone to breakage.

If you fail in resolving the problem in several attempts then it will worsen with time and it would eventually cause a severe blockage. Therefore, in such a scenario, rather than tackling the issue yourself, its best to consult a professional plumber.

  1. Constantly Running Toilets

Constantly running water in toilets can cost a loss of up to 150 gallons each day or maybe more. The most common cause of this is a non-functional flapper valve that controls the flow of tank water to the bowl. In such a situation, the tank water pours continuously into the bowl, while another reason for this could be a faulty fill tube.

  • Ways to Resolve: Replace Flapper Valve or Mend the Fill Tube

The solution to this plumbing problem is an easy fix and can be tackled with the help of appropriate toilet repair tools. Fix the flapper valve with a reliable replacement or mend the fill tube with strong adhesive. If the fill tube is broken then you have to replace it with a new one. However, if the issue persists even after replacing the faulty parts then it could be something more complex and might require a professional to handle it properly.

  1. Faulty Water Heater

Lack of hot water during cold winters can be very frustrating and the issue is only realized when you are taking a shower and the supply of hot water suddenly goes-off. This problem can arise due to various reasons; such as a failed pilot light, build-up of sediment in the water container, a plumbing leak, or other issues related to the thermostat.

  • Ways to Resolve: Repair Faulty Thermostat or Replace the Worn-out Heating Element

The first and foremost thing to check in this problem is the circuit breaker. See if there are any potential trips in the breaker, otherwise, you should inspect it further. Check the thermostat – and if it is also functioning properly then the source of the problem could be a worn-out heater element. Get a suitable replacement from the market and put your water heating system back to work.

  1. Low Water Pressure

The problem of low water pressure occurs mostly in old constructions. This causes the taps to trickle rather than gushing-out water. The low water pressure is seen mainly due to leaking water pipes that are either broken or corroded over time. Another cause may be the clogging of the rust deposits and other sediments on aerators.

  • Ways to Resolve: Clean the Aerator or Inspect the Supply Pipes

Troubleshooting this problem can be a little complex and a brain-drainer as compared to other plumbing jobs. At first, you need to check whether the pressure is low for both hot and cold water supply taps. If so, then the problem is most likely due to the buildup in the faucet aerator. This can be resolved by simply removing the aerator and cleaning it with high-pressure water, vinegar or baking soda. If the problem persists, then chances are that with time your pipes have corroded or there is a leak at any spot.

Conclusion

Minor plumbing problems can be a real headache. And, if not attended on time, they can cause a plumbing disaster, which can be very costly at times. Minor plumbing issues can be solved easily with the use of the right tools but if there is a major leak in the pipes then its best to consult a professional plumbing service to promptly resolve the issue. As delays will be costly in this matter.