If your smoke alarm is incessantly beeping, and you can’t find the cause, then it’s probably a false alarm. Don’t worry, this is an easy guide to help you turn off your smoke alarm quickly, allowing you to live in peace once again. We also have a few tips to avoid false alarms in the future, so your home will be safer, and you’ll be less likely to crush the alarm with the end of a broom in the middle of the night.
How to Reset Your Smoke Alarm:
- The first thing you need to do is double check that there definitely isn’t a fire in your home – don’t just automatically assume that it’s a false alarm.
- If the alarm has been set off by steam or smoke from cooking, then open a window and wave something to disperse the smoke. This should be enough to turn the alarm off after a few seconds.
- If the cause of your beeping smoke alarm isn’t smoke or steam, then you will need to reset the device. Turn off the power in your circuit breaker before doing so.
- Take the alarm out of the mounting bracket, and unplug it.
- Remove the batteries, and press the reset button for 15-20 seconds.
- Replace the batteries with fresh ones, place the alarm back in the mounting bracket, and turn the power back on.
- If resetting the alarm doesn’t fix it, then you probably need to invest in a new smoke detector. Purchase and install one immediately to ensure your home is protected.
How to Avoid False Alarms
It can be very frustrating if you’re consistently being bothered by false alarms, but it’s also dangerous, as you’ll be less likely to take the real situation seriously. So it’s important to fix your alarm immediately if you’re experiencing problems. Luckily, there are some easy things you can do to avoid false alarms, they include:
- When you are installing new smoke alarms, remember not to position them in direct sunlight, near the stovetop, or outside a bathroom.
- Regularly clean the sensor chamber, as dust and dirt can interfere with the device’s accuracy.
- Make sure the batteries are installed correctly by checking the battery pull tab, and pushing them to see if they have clicked in properly.
If none of these ideas helps with your faulty alarm, then it may be time to invest in a more reliable detector. Check how old your smoke alarm is, and if it’s more than 10 years old it will definitely need replacing.
Why an Expert Electrician Can Help
Smoke alarms are a necessity in your home, and if they aren’t working properly, it’s best to get a professional’s opinion. When it comes to ensuring the safety of your family, taking shortcuts isn’t a good idea. Look for a reliable electrician in Perth that will conduct an expert smoke alarm inspection, and install your detectors in the correct position.